Security feature may truly be tamper proof
By Zack Martin, Editor, Avisian Publications
Often the emphasis is on the security used to protect the data stored in a card, but what’s equally as important are the security features techniques used to protect the data printed on the card itself.
Laser engraving is nothing new, but the price is dropping and more customers are looking at the security feature, says Jonathan Bowen, sales manager at Digital Identification Solutions. The Greer, S.C.-based company released the EDIsecure LCP 9000 Laser Color Personalization System last year, one of the first desktop laser engraving systems that sells for less than $100,000.
Digital Identification Solutions is targeting the printer to the driver license and government markets in the Americas, Bowen says. “Those who have huge issues with forged and faked cards are our primary customers,” he says. The company is expecting to ship its first units this fall.
Overseas more governments are using laser engraving or looking at the technology as well, says Chris Dyball, chief operating officer at Lasercard Corp. The Mountain View, Calif.-based company provides national ID systems to a number of countries. Costa Rica’s national ID and the U.S. and Canada’s Permanent Resident Cards each use laser engraving, he says.
As governments are looking for better ways to secure documents many are finding a solution in laser engraving. “The predominant way of creating images on a card was dye transfer but many are transitioning to laser engraving,” Dyball says.
But with dye sublimation printers a fraction of the cost of laser engraving why make the switch? “Laser engraving makes it difficult to remove or alter the card information,” Bowen says. “The normal person who wants to fake the card won’t bother with it, he’ll move on to another target. It’s also expensive enough to keep the criminal element away and technical enough to where if he got it he wouldn’t know what to do with it.”
Laser engraving actually burns the information into the card, Bowen says. “It burns through the top level and reacts with the inner card body,” he says. “It’s impossible to scratch the information off or remove it with chemicals.”
Information can sometimes be removed or changed from cards printed on dye sublimation machines, Dyball says. “The image is essentially at the surface,” he says. “You can then put a overlay over the dye transfer image but even when you do that you can peel off the patch and take solvent or a mild abrasive and remove it and the fraud would be difficult to detect.”
Dye images can also suffer over time, Dyball says. Temperature and humidity can affect the images over time causing them to fade.
Laser engraving also creates a tactile security feature on the card, Bowen says. When the information is burned into the card body it creates raised ridges that can be felt, similar to an embossed credit card. “When a state trooper pulls someone over and only has a few minutes to validate an ID the tactile feature is great,” he says. “It’s virtually impossible to forge on a desktop printer.”
Laser engraving also has the ability to print changeable laser images and multiple laser images on cards, Bowen says. This enables an issuer to print a last name and date of birth in the same area but depending on what angle you hold the card what is seen changes. For example, at one angle an individual will see the name but at another he will see the date of birth.
To enable this feature an issuer has to make some changes to its card stock manufacturing process and place a small lens on the card body. The laser will then burn the information in at different angles to enable the feature. “It’s a security feature you can see with the naked eye and it’s impossible to create with any other type of desktop printer,” Bowen says.
Laser printers have another advantage, no consumables, such as printer ribbons, Dyball says. People with widely distributed issuance sites are looking at laser engraving because of the savings on consumables,” he says. “You have an upfront investment but savings over time.”
Drawbacks of laser engraving
The high cost is one drawback to laser engraving, another is the inability to print color images, Dyball says. “Laser engraving over the past few years have gotten better at gray scale images,” he says, noting that current engravers can modulate the pulse of the laser and get much better gray scale images.
Some still want color, though, and use both dye sublimation and laser engraving. “We have a customer in Italy who buys the card bodies and color prints the photos and laser engraves the text,” Dyball says.
As counterfeiters get more sophisticated and governments want to increase security, laser engraving is one solution they may look at.
National ID, Passport & Driver License programs that have issued or will implement a laser engraved polycarbonate document:
- British Columbia
- Czech Republic
National ID Card
- Hong Kong
- New Zealand
- Czech Republic
- US State Passport Card
- Canada Passport Card
- Germany – Health Card
- Canada – Immigration Card
Source: Ian Williams, Identity Systems Group Inc.